www.california-instruments.com
ISO 9001:2000
CTS Series - EN / IEC 61000-4 Immunity Test 1
C TS s yste m s e x t e n d t h e i r
usefulness by offering a wide
range of Immunity tests in addition
to Harmonics and Flicker emission
tests. These AC immunity tests
are controlled from the PC using
the included CIGUI32 AC source
control software.
Pass or Fail results are determined
by the operator based on an
evaluation of the condition of
the equipment under test at the
end of the test run. Operater
observations made during the
test and test settings used are
included in the MS Word format
test report.
Test parameters for most EN/IEC
1000-4 tests are set by product
committees for various product
categories. The CIGUI32 software
allows test parameters for any
number of EUT’s to be saved to
disk. This makes it easy to create a
library of commonly used IEC test
setups for quick recall.
In addition to the IEC immunity
tests, software modules for
avionics power test standards Mil-
Std-704,RTCA-DO160, ABD0100,
and AMD-24 are available as
options on iX power source based
CTS systems.
EN / IEC 61000-4-11
2 -
Ed. 2
The Voltage Dips and Interruptions tests
are included in the AC source control
program supplied with the CTS system.
The operator is presented with a simple
screen that shows the type of test that
will be run and the test duration. The
operator can enter the desired nominal
test voltage and frequency.
Clearly labeled buttons are provided for
Test Run and Test Abort. Test parameters
can be changed by the user if needed to
accommodate dierent test levels called
out by product standard committees. For
AC source compliance, the EOS option
is required. This option is available on
3001iX-CTS, 5001iX-CTS and 15003iX-
CTS systems.
EN / IEC 61000-4-13
3
The iX Series AC/DC Source can be
equipped with the -413 option to provide
full support for EN/IEC 61000-4-13
harmonics and Interharmonics testing.
An independent, digitally controlled
sweep generator is used to superimpose
interharmonics on the AC output. The AC
source’s data acquisition system is used to
determine EUT resonance points during
the frequency sweep test. Flat top curve
and overswing curve waveforms are
generated using the arbitrary waveform
generation capability of the iX Series
AC/DC source.
At the end of the test run, a detailed
test report can be printed for complete
documentation of test setup and
results.
1)
Compliant IEC61000-4Tests arenot supportedon RP-Seriesbased CTSsystems orsystemswithoutan ACsource(100-CTS& 300-CTS-75).
2)
IEC 61000-4-11 AC Source compliance requires -EOS option.
3)
IEC 61000-4-13 test requires iX or MX Series with -413 option.
4)
IEC 61000-4-17, -27 and -29p test requires iX Series based CTS systems. 4-27 and 4-29 are pre-compliance only.
EN/IEC 61000-4-11 Test Window
EN/IEC 61000-4-13 Test Window
(216 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais